Wet-condition capacity

Measure DAC coating capacity when wet; your dry datasheet is likely wrong.

DAC coating QC · PMC-1 / EMC-2 (paramagnetic)

The indirect method

Three places the by-difference number lets you down.

01
Direct-air-capture coatings spec'd dry, deployed in humid air.
02
Wet capacity and durability diverge from the dry number on the sheet.
03
Coating QC has no direct, wet-condition acceptance test.

The direct read

Read the coating's wet capacity, and what survives cycling.

Coating QC has no direct wet-condition read. We give you that read: how much CO₂ the coating holds once it is wet and working, weighed on the solid itself. A separate cycling run shows what is left after repeated load and release.

Wet capacity tracked across cycles, against the dry datasheet it has to beat.

The proof

Anchored to granted IP and peer-reviewed work.

The peer-reviewed work this rests on, linked so you can read it yourself. The patents covering the method live on the science page.

10.1016/j.jcou.2025.103144

How we start

A feasibility check, then a use case defined with you.

Start a feasibility check

1Send 3–5 samples
2We run direct liquid-phase tests
3You get loading / release + ranking
4Together we define the use case

Ready when you are

See what's really on the solid for dac coating qc.

Start with a feasibility check. We tell you whether the method fits your material, and work out the use case together.

Book a sorption study Talk to the lab