Book a sorption study

Send us a few samples. We’ll show you what is on the solid.

No payment today — we confirm the read is possible, then scope the work with you.

Which studies would you like?

Pick one or more. Most engagements open with a Feasibility Check, then add the studies you want. In the next step you choose which study runs on which material, and we refine the scope with you. Nothing is charged now.

Feasibility Check

Recommended first step

Send 3–5 samples. We confirm whether your material and analyte can be read directly in the working liquid, and work out the use case with you.

Price: Entry study — the front door to every engagement.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Single Capacity Run

One material, one analyte. We weigh the loading on the solid at working conditions, rather than backing it out of the liquid by difference.

Price: Per material; quoted after feasibility.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Screening Sprint

Rank a library against one analyte by directly-read loading. Up to 100 materials, one calibration each, so the winners stand out on their own.

Price: Per batch; volume rate for libraries.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Release Kinetics

Uptake and release over time, read on the carrier itself. Half-life and release profile, tracked live in liquid, for drug-delivery and recovery work.

Price: Per material; time-resolved study.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Isotherm Map

Loading mapped across a concentration range: a full liquid-phase isotherm on the working solid, fitted at high R², for design and modelling.

Price: Per material; multi-point study.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Cycling Stability

Capacity tracked over repeated load–release cycles. Does the material keep working, or fade? That answer a dry datasheet can't give you.

Price: Per material; cycle count agreed up front.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Mixture Identity Add-on

An orthogonal identity check (HPLC / UV-Vis / gravimetric) added to any run, for when more than one species could be loading.

Price: Add-on to any study.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

Custom R&D Report

A scoped study for a question the catalogue doesn't cover. We design it with you, run it on the right device, and write it up as a proof pack.

Price: Scoped and quoted per brief.
Mass: ≥ 15 mg each (PMC-1 / EMC-2). If the DC-10000 is needed later, we'll ask for ≥ 50 mg. A device spec, not an analyte limit of detection.

No studies selected yet — pick at least one to continue.

Step 1 / 5

No payment now. Submitting opens a project and a feasibility result — the quote comes after we confirm the read.

Optional: create an account

You can book or enquire without one. An account (passwordless, just a magic link) saves you steps later:

Reuse saved samples and materials next time you book
Sign the NDA / MTA in one click
Follow each study and get results sooner
Keep every report and document in one place

Yours stays yours
Your samples, your identity, your results — held under a mutual NDA / MTA.
Feasibility first
Before any larger study, we check the read is even possible.
A result, not an invoice
Sending samples opens a project. The quote comes once we know the fit.